Y line filter series magnetic pipeline filter is a filtering device used in pipeline systems, especially for removing magnetic impurities (such as rust, iron filings, etc.) from fluids.
The usage method is as follows:
1、 Preparation before installation
Determine installation location: Typically, Y line filter series magnetic pipeline filter should be installed at the entry point of the pipeline system, such as the inlet end of pressure reducing valves, relief valves, globe valves, or other equipment, in order to effectively capture particles and impurities in the fluid.
Check the filter: Ensure that the appearance of the filter is not damaged, and that the filter screen and magnetic components are intact.
Prepare the pipeline: Clean and prepare the pipeline to ensure that its surface is free of dirt and impurities, so as not to affect the sealing effect.
2、 Installation steps
Close valves: Before installation, ensure that the valves of the relevant components are closed to prevent fluid flow.
Apply sealant: Before connecting the filter, apply an appropriate amount of sealant or lubricant to the threads on the pipeline interface to ensure the sealing of the connection.
Install filter: Align the connection part of the Y line filter series magnetic pipeline filter with the pipeline interface and slowly insert it into the pipeline. Use appropriate tools to fasten the filter to the pipeline interface, ensuring a tight connection and avoiding water leakage.
Check installation: After installation is complete, reopen the valve to allow fluid flow and check for any water leakage at the connection to ensure that the filter is functioning properly.
3、 Usage and maintenance
Regular inspection: Based on usage and fluid properties, regularly check the filter screen and magnetic components of the filter to see if there is a large accumulation of impurities or damage.
Cleaning the filter screen: When a large amount of impurities are found on the filter screen, it should be cleaned in a timely manner. When cleaning, the filter can be removed, rinsed with clean water or a suitable cleaning agent, and then reinstalled.
Replace magnetic components: If the magnetic force of the magnetic components weakens or is damaged, they should be replaced with new ones in a timely manner to ensure the filtering effect.
Record and maintenance: Establish a record of filter usage and maintenance, recording the time, reason, and effect of each cleaning and replacement of magnetic components for subsequent management and maintenance.
4、 Precautions
Avoid collision: During installation and use, avoid severe collision or compression of the filter to prevent damage to the filter screen and magnetic components.
Choose the appropriate installation environment: Ensure that the filter is installed in a dry, ventilated, and non corrosive gas environment to extend its service life.
Follow operating procedures: Install, use, and maintain the filter strictly in accordance with the operating procedures to ensure its normal operation and filtering effectiveness.
By following the above steps and precautions, the correct use and maintenance of the Y line filter series magnetic pipeline filter can be ensured, thereby protecting the normal operation of the pipeline system and extending the service life of the equipment.